SEH INTERCON Instrukcja Użytkownika Strona 32
- Strona / 119
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
User’s Manual InterCon-PrintServer
32
Use these commands for:
•
Transfer mode switched to binary
•
Timeout for retrying sending packets set to 30 seconds
•
Total timeout for transfer set to 15 minutes
tftp> binary
tftp> rexmt 30
tftp> timeout 900
If you wish to observe the transfer, switch to trace mode by entering:
tftp> trace
Upload the software update binary file (e. g.
po_828.bin
):
tftp> put po_828.bin
If trace is activated, the number of the sent and confirmed data packets are displayed. After
receiving the first data packet the Flash EPROM of the print server will be erased. After 10 seconds
the next data packets follow.
During the data transfer to the print server the red LED of the print server continuously shines. If the
TFTP protocol reports that the data transfer is finished, then the download of the software update
binary file is completed. Exit the TFTP protocol by entering:
tftp> quit
If a network error occurs during the download procedure the print server will wait for the next data
packet until the network is stabilised. If the timeout exceeds the pre-set value the TFTP protocol
terminates the data transfer. The print server must then be restarted.
After being switched on the print server will detect that the EPROM is not completely
reprogrammed. (Notice that the red LED is flashing very fast). The print server now waits for the
binary file transfer. Start the TFTP protocol and continue as described above.
- USER MANUAL II 1
- 8 Apple 95 3
- 10 Appendix 101 3
- 10.9.1 FTP Commands 118 4
- 10.9.2 SITE Commands 118 4
- 5 5
- Conventions 6
- 7 7
- 2 General 9
- 2.1 Functional Overview 10
- 11 11
- 2.3 Notes 12
- 3 Configuration Software 13
- 3.1.1 Status Menu 15
- 3.1.2 Configuration Menu 16
- 17 17
- 3.1.3 Actions Menu 19
- 3.2.1 Print Server Menu 21
- 3.2.2 Status Menu 21
- 3.2.3 Config Menu 22
- 23 23
- 3.2.4 Download Menu 24
- 3.2.5 Sort Menu 24
- 3.2.6 Options Menu 25
- 3.2.7 Help Menu 25
- 27 27
- 4 Software Update 29
- 4.1 Windows (IPX protocol) 30
- 4.2 TCP/IP (TFTP protocol) 31
- 33 33
- 5.1 Functional Overview 34
- 35 35
- 5.2.1 NetWare 3.x 36
- 37 37
- 5.2.2 NetWare 4.x 38
- Example: 39
- REMOTE_PRINTER 39
- via Administration Tool 39
- 41 41
- 43 43
- 45 45
- 5.5 Novell Protocol Types 46
- 47 47
- 49 49
- The installation is complete 50
- 6.2 Windows NT 3.51 51
- 53 53
- 6.3 Windows NT 4.0 55
- Printer Ports 56
- 57 57
- 59 59
- 61 61
- 7.1 Functional Overview 62
- 63 63
- 65 65
- 7.3.3 Boot Protocol BOOTP 67
- 7.3.4 Boot Protocol RARP 68
- (for example in 69
- /etc/rc.local 69
- /etc/rc2.d/S 69
- 71 71
- 73 73
- 7.7.1 IBM AIX (Version 3.x) 74
- 7.7.2 IBM AIX (Version 4.x) 75
- 7.7.3 AIX (without SMIT) 76
- 7.7.4 HP-UX 77
- 7.7.5 SunOS 78
- 7.7.6 SCO UNIX (Version 3.2) 79
- 7.7.8 System V (General) 81
- 7.9 SINIX SPOOL V4.x 82
- 83 83
- 85 85
- 87 87
- 89 89
- 7.10.4 BSD Print Spooler lpd 90
- 91 91
- 93 93
- 95 95
- 8.1 Functional Overview 96
- 8.3 Name and Zone Setting 97
- 8.2 Installation 97
- 99 99
- 10 Appendix 101
- Action Reaction of LED's 105
- Network Menu 107
- IP address 108
- Gateway address 108
- Network mask 108
- Apple protocol 108
- BOOTP/RARP and DHCP protocol 109
- Restart print server 109
- 10.3.2 Parameters 109
- Novell NetWare 111
- Opt. Status Page 111
- TCP/IP Protocol 111
- TCP/IP Parameter 112
- APPLE / EtherTalk Protocol 112
- 10.5 Administration Software 113
- 10.8 Shellscript 115
- 10.9.1 FTP Commands 118
- 10.9.2 SITE Commands 118
Exergen Scanner Benutzerhandbücher
Die Liste der Exergen Scanner -Produkte enthält 4 Benutzerhandbücher für 4 diese Modelle. Alle PDF-Benutzerhandbücher können heruntergeladen oder online angezeigt werden.
Komentarze do niniejszej Instrukcji